You will need:
1. Fixing clips
2. Sealing tape
3. Fret saw
4. Screwdriver
- Place the sink upside down on the counter in the position where it is to be installed, and trace the outline of the sink on the counter top with a pencil.
- Draw another line 10 mm inside the first line. Cut a hole in the counter top following this second, inner, line.
- Adhere the seal tape around the underside of the edge of the sink, being careful to lay it smoothly (without ridges).
- Place the clips on the sink in their horizontal position.
- These anchor clips are designed for use with counter tops 30-40 mm thick. If your counter top is thinner, insert wooden wedges between the counter top and the braces so as to secure them.
- After placing a clip at each corner of the sink (or 4 at opposing sides in the case of a single round bowl), place the rest evenly spaced around the perimeter of the sink.
- Tighten the screws of the clips with a hand screwdriver to secure the sink in place.
