Home > Archive by tag 'installing a bathroom basin mixer tap'

Tag Archives: installing a bathroom basin mixer tap
What is single or dual flow tap?

What is single or dual flow tap?

by Mark on 31. Aug, 2009 in Bathroom DIY, DIY, Kitchen DIY, What is

Dual flow taps used to make up the majority of monobloc tap sales but the current trend is towards single flow style taps. It is recommended that non return valves are fitted to single flow taps. All the mixers sold by Grand Taps are the single flow style. – In single flow taps the hot [...]

Read full story • Comments { 0 }
How To Connect A Lever Pop Up Waste

How To Connect A Lever Pop Up Waste

by Mark on 12. May, 2009 in Bathroom DIY, DIY, Home improvement

The lever operated pop up waste is a series of levers connected through a hole in back of the basin mixer tap, down through the basin tap hole to the basin waste plug. You pull the lever up to close the plug and you push the lever down to open the plug. This lever system [...]

Read full story • Comments { 1 }
How To Install A Bathroom Basin Mixer Tap

How To Install A Bathroom Basin Mixer Tap

by Mark on 07. Apr, 2009 in Bathroom DIY, DIY, Home improvement, Home maintenance

Turn the Water Off First! The mixers are relatively simple to install although we do recommend you get a qualified person to do the installation. 2 flexi pipes connect your hot and cold water into the bottom of the unit. Prefferably hand tighten the pipes, do not use tools that will damage the connection. The [...]

Read full story • Comments { 6 }